Scaffolding

Home » Scaffolding


Products

Cuplock Scaffolding System

Wedge Lock Scaffolding System

Slab Support System

H Frame Scaffolding

Scaffolding Accessories

Scaffolding Platforms

Wall Panels

Adjustable Jacks


Service

Fabrication Work

R-Lock Scaffolding

Detail

The principle feature of RAD R-Lock is the unique method of connecting ledgers and transoms to the standards in one single action without the use of nuts, bolts or wedges.

The locking devices, is formed by two cups, a fixed lower cup which is welded to the standard at pre-located intervals, and a sliding upper cup. The forged blade ends of ledgers and transoms are located in the lower cup, the upper cup is moved down to secure the component in place and tightened by a hammer blow to give a positive and rigid connection.

It is the revolutionary node point locking principle which makes RAD R-Lock faster to erect than any other pocket system scaffold.

There is not much time wasted in lining up pockets on standards as it does not have pockets at different levels. There is no loose parts and no delays trying to fit damaged wedges.

Both vertical and horizontal members are manufactured from 48.3mm overall diameter x 3.2mm thick tubes

RAD R-Lock products is usually primed and painted for maintenance free use. However the product could be galvanized, powder coated or electroplated based on our customers needs

RAD - K Lock conforms to BS1139 Part 5, HD1000, OSHA and Australian New Zealand Standards.

R-Stage Scaffolding

Detail

RAD R-STAGE is a versatile scaffold system which can be used for all forms of access and support structures in the building and construction industries, shipbuilding, offshore construction and industrial maintenance.

R-STAGE provides major savings in erection and dismantling times thus minimizing on-site costs. When not in use, its modular construction ensures minimal space requirements for storage.

RAD R-STAGE is a modular system scaffold with wedge fixing for all access scaffold requirements. The wedge fixing of the ledgers and transoms gives a simple and fast means of erecting access scaffolding without loose parts. Rigid four ways fixing giving a positive location without movement. Spigot and wedge fixed on the standard to give guaranteed vertical alignment.

RAD R-STAGE products is usually primed and painted for maintenance free use. However the product could be galvanized, powder coated or electroplated based on our customers needs

RAD R-STAGE conforms to BS1139 Part 5, HD1000, OSHA and Australian New Zealand Standards.

R-Ring Access Scaffolding

Detail

Is a proven multi-purpose scaffold system which can be used for all forms of access and support structures in the building and construction industries, shipbuilding, offshore construction and industrial maintenance.

R-Ring is extremely versatile. It can be erected for straight, curved or circular configuration for both access and support, and also for independent mobile towers.

Both vertical and horizontal members are manufactured from 1.90" overall diameter x 10 gauge high strength steel tubing with a minimum yield strength of 50,000 lbs/inch2 and a minimum ultimate tensile strength of 75,000lbs/inch2.

There are no loose components on the R-Ring System that can be lost or require maintenance. All components are Hot Dipped Galvanized Finish with a minimum zinc coating of 85 microns.

RAD R-Ring Conforms to BS1139 Part 5, HD1000, OSHA and Australian New Zealand Standards.

Frame System (Light Duty)

Detail

The Light weight Frame System for access has bee specially designed for fast and easy assemble by unskilled operatives, coupled with the minimum of supervision. The basic system comprises of a small number of components, which fit together with the minimum of effort to form a firm and stable structure. Each frame incorporates quick action flip-lock fittings for the attachment of the horizontal and diagonal members.

R-Fittings

Detail

Fittings Includes comprehensive range of components which are strong, safe, economical and are ideally suited for wide application in buidling construction and maintainance industry.

Double Coupler Pressed Steel

Sizes Available

CodeSizeWeight
fpd/fbd48.3 x 48.30.91


Swivel Coupler Pressed Steel

Sizes Available
CodeSizeWeight
fps/fbs48.3 x 48.30.91


Swivel Coupler Pressed Steel

Sizes Available
CodeSizeWeight
fps/fbs48.3 x 48.31.08


Double Coupler Drop Forged

Sizes Available
CodeSizeWeight
ffd48.3 x 48.31.13


Swivel Coupler Drop Forged

Sizes Available
CodeSizeWeight
ffs48.3 x 48.31.29


Putlog Couplers

Sizes Available
CodeSizeWeight
fpp48.30.61
ffp48.30.67


Girder Couplers

Sizes Available
CodeSizeWeight
fpg48.31.4
ffg1.5


Sleeve Coupler

Sizes Available
CodeSizeWeight
fpsl48.31.06


Expanding Joint Pin

Sizes Available
CodeSizeWeight
fpjp48.30.9


Light-Dutyspecial Coupler

Sizes Available
CodeSizeWeight
fld48.30.72
fls0.75


Roofing Clamp

Sizes Available
CodeSizeWeight
fpr----


Staircase Coupler

Sizes Available
CodeSizeWeight
fpst----


Fencing Coupler

Sizes Available
CodeSizeWeight
fpfc0.34

Special Formwork

Detail

Civil and Structural engineers draw on the latest research and development to design cost effective structures. The enormous power of computers and global information are enlisted to implement extremely daring, yet practical construction projects safely and quickly.

Design gives ways to construction, as the initial concept becomes reality. Yet cost -effectiveness is an important factor which every one considers.

We at RAD design special scaffolding to suit our customers need. Special formwork is carefully designed by our in-house design department to ensure cost-effective and safe scaffolding to suit the need of our customer.

Table Formwork

Detail

The RAD Table formwork system provides the construction industry with modern formwork, which fully meets all economical and practical application demands.

RAD Table formwork system is made with the combination of wood and steel to accommodate very heavy loads. It can be variable adjusted to small and large heights. The sturdy table form can be repositioned completely in one piece.

RAD Table formwork system is so versatile, that practically every floor can be formed with it.

Wall Formwork

Detail

The general purpose wall support combining high performance with simple, rapid assembly , great versatility and major cost advantages. The Steel wall form work provides maximum benefits when used with heavy duty ties and steel walings. The highlights of our wall formwork system is as follows

  • Strong movements of Resistance 25.5 KNM.

  • The right length for the job. (Four metric sizes catering for all common formwork heights.

  • Tall forms with fewer ties. ( End to end joining of soldier with the joint plate reduces ties to the minimum)

  • Economic use of wailings (Timber or steel wailings can be used at optimum spacing. There are no pre-set fixing positions)

  • Specially designed for used with KG Aluminium Beams (Most advance formwork system but with big savings in Ties)

  • Crane Handling (Complete forms can be handled by crane and lifted clear without dismantling tiles)

  • Precise leveling and plumbing (Integral Jacks bring the form level and to plumb without welding or packing)

  • Safe access (Access brackets and Handdail Post provides safe working platform, whatever the hight).

  • Flexible tie spacing (Ties can be position at any height so that efficient position can be used.

Home   |   Company Profile   |   Products   |   Services   |   Scaffolding   |   Management   |   Quality   |   Our Team   |   Quality & Inspection   |   Rad World Wide   |   Certificate   |   Contact Us   |   Enquiry   |   Sitemap

© Copyright 2009 - 2010. All Rights Reserved. Radscaffold & Fabrication

Exporters Directory - B2B Network of ExportersIndia.com