Decking Beam

The Decking Beams span between Dropheads or between Beams, they can be very convenient during constructions with waffle or trough forms. During such application, the beams run in one direction only & they are located in position by In Fill Beams.

The standards are spaced transversely to ledgers. Steel panels or strips of plywood are then bolted to the top of the Beams through the bolting holes. The waffle or trough forms are then placed over the Beams in position.

1.6m and 1.2m Beams

More Detail

Drophead

The slab support system is designed to support a large combination of grid sizes for maximum reusability of formwork & economy. Drophead offers the facility for early striking of the formwork.

The wedge plate on the Drophead can be conveniently struck so that the Drophead remains in position to support the slab, but the decking beams can be dismantled & assembled on next location enabling optimum utilisation of the formwork.

The essential part of the Quick Strike Decking system, is provided with a strong steel wedge which supports the beam & infill beams at desired height. One hammer stroke is enough to lower the beams & infill beams, so that same can be removed with plywood. While slab support remains undisturbed.

Infilled Beam

Decking Infill Beams

Beam Bracket

Code No : 1057
SWL 5.0kN

The Decking Beam Bracket receives 6"x2" timber (152mmx51mm) and provide support to steel panels or plywood in make up areas where standard Infill Beams are not suitable. Timber of upto 2.4mts length can be fixed on the Bracket and supported on Dropheads or Beams.